This SCPI Programming Manual provides information for remote operation of the MS20xxB Vector Network Analyzer (MS2024B, MS2025B, MS2034B, and MS2035B) using commands sent from an external controller via Ethernet or USB connection. This Programming Manual includes the following:
• An overview of Ethernet and USB connection to the MS20xxB
• An overview of Standard Commands for Programmable Instruments (SCPI) command structure and conventions
• The IEEE common commands that are supported by the VNA Master
• A complete listing and description of all the SCPI commands that can be used to remotely control functions of the VNA Master. These commands are organized by instrument mode and are listed in All Mode Commands.
This manual is intended to be used in conjunction with the VNA Master MS20xxB Vector Network Analyzer User Guide, Anritsu Part Number 10580‑00301. Refer to that manual for general information about the VNA Master, including equipment setup and operating instructions.
Introduction
This chapter provides a general description of remote programming setup, USB and Ethernet interface connections, and cable requirements.