Press the Shift button then the File (7) button on the numeric keypad to list the File menu. Follow the additional steps below.
Note
When navigating through the File menu, pressing the Esc button returns to the previous menu.
Save Files
Set the Save Location
Press Save then the Change Save Location submenu keys and select the location to save files. You can save files to the internal memory or to an external USB flash drive. You can also create new folders. If an external USB flash drive is connected or disconnected, press Refresh Directories to update the location tree. Press the Set Location key to store the save location.
Save Measurement As
The Save Measurement As key is used to quickly save measurements with a specific file name. The VNA Master saves the measurement with the latest file name that was used to save a measurement and with a number that is automatically incremented and appended to the end of the file name. For instance, if the last measurement was saved with the name System Return Loss, Save Measurement As saves the next measurement as System Return Loss_#1, System Return Loss_#2 etc. The file name used can be changed using the Save dialog box (Figure: Save Dialog Box).
Save a Measurement
Press the Save Measurement key and enter the name for the measurement file. The measurement file can be stored as .MNA.
Save a Setup
Press the Save submenu key, type a name for the setup file, confirm that the file type is Setup using the Change Type key or the touch screen, and then press Enter to save.
Create a Menu Shortcut for a Setup File
Press the Recall submenu key to display saved setup files. Locate the setup file to shortcut and then press and hold on the file name for a few seconds. Select a location in the shortcut grid to save the setup file.
Save a Measurement Screen as JPEG
Press the Save submenu key, type a name for the JPEG file, confirm that the file type is Jpeg, and press Enter to save.
Save Dialog Box
The save dialog box (Figure: Save Dialog Box) is used to store files on the internal memory or an external flash drive. The file type, file name, and save location are set starting with this display. Refer to Save Menu and Save Location Menu for details.
Save Dialog Box
Quick Name Keys
Quick Name keys (located below the keyboard in Figure: Save Dialog Box) allow you to enter quick names for frequently used parts of file measurement names. To edit the keys, press the Shift button, then the File (7) button. Press Save then the Change Quick Name key, and select one of the Quick Names for editing. Press Enter and enter the new name for the key. Press Enter again, and the new name is displayed on the Quick Name key.
When entering filenames, use the quick name keys in any order in combination with the keyboard to create measurement filenames.
