Set the Span

Spectrum Master™ User Guide : Quick Start Guide : Set the Span

Set the Span

Spectrum Analyzer, Interference Analysis, and Power Meter Modes

1.

Press the Span main menu key or press the Freq main menu key followed by the Span submenu key.

2.

To select full span, press the Full Span submenu key. Selecting full span overrides any previously set Start and Stop frequencies.

3.

For a single frequency measurement, press the Zero Span submenu key.

Note

Power Meter modes do not have a Zero Span submenu key.

To quickly move the span value up or down, press the Span Up 1‑2‑5 or Span Down 1‑2‑5 submenu keys These keys facilitate a zoom‑in, zoom‑out feature in a 1‑2‑5 sequence.

Note	Power Meter modes do not have a Zero Span submenu key. To quickly move the span value up or down, press the Span Up 1‑2‑5 or Span Down 1‑2‑5 submenu keys These keys facilitate a zoom‑in, zoom‑out feature in a 1‑2‑5 sequence.

Copyright 2011 Anritsu Company
	Anritsu Company
	1800-ANRITSU
	10450-00034, Rev. A
	mmdtechpubs@anritsu.com