This SCPI Programming Manual provides information for remote operation of the MS2720T High Performance Handheld Spectrum Analyzer using commands sent from an external controller via Ethernet or USB connection. This Programming Manual includes the following:
• An overview of Ethernet and USB connection to the instrument.
• An overview of Standard Commands for Programmable Instruments (SCPI) command structure and conventions.
• The IEEE common commands that are supported by the MS2720T.
• A complete listing and description of all the SCPI commands that can be used to remotely control functions of the Spectrum Master. The commands are organized by instrument mode starting in All Mode Commands.
This manual is intended to be used in conjunction with the MS2720T User Guide, P/N: 10580‑00340. Refer to that manual for general information about the MS2720T, including equipment setup and operating instructions.
Introduction
This chapter provides a general description of remote programming setup and interface connections using Ethernet or USB, and sending SCPI commands to the instrument.