If your controlling device is a laptop computer with Anritsu Line Sweep Tools (LST) installed, then you can use LST to open the PIM Master measurement files directly from the Browser File List, and then generate site reports. Figure: Example of Trace in Line Sweep Tools shows LST working with the same trace as shown in Figure: Example of Browser Remote Control Window.

 

Saving a measurement with the browser is similar to saving on the PIM Master itself. The Save dialog box is shown in Figure: Example of Save Dialog Box. A saved measurement is shown in the Delete dialog box in Figure: Example of Delete Dialog Box.

Access via router and browser can be password protected. If your router does not have a password, or if you chose not to use it, then you can set a password in the browser remote control window by using the Device Management tab. By default, no password protection is set for browser access. Figure: Browser Device Management Window shows a password example.

After a password has been set, you must use the password to gain access to the PIM Master. Figure: Browser Password Request Window shows the password request window. After the password has been entered, access to the PIM Master is open via the router to any computer device with router access until you log out. Use Logout in the browser tab bar to end your access.

You can set a name for the PIM Master from the Device Management tab (Figure: Changing the PIM Master Instrument Name). This is the same as using the System menu in the PIM Master to enter a name. An instrument name can be a convenient addition when creating measurement reports.