 | Factory Defaults Press this submenu key to restore the PIM Master to its factory default parameter values and Mode settings, including Ethernet, language, and brightness settings. Press the Enter key to initiate the reset. The PIM Master is automatically rebooted as part of this operation. To return to normal operation without resetting, press Esc rather than pressing Enter. Note: This same reset sequence can be initiated when turning the PIM Master On by pressing and holding the Esc+On keys until the Anritsu splash screen is displayed. Master Reset Press this submenu key to restore the factory setting to all system parameters, including Ethernet, language, and brightness settings. Also, all user files in the internal memory are deleted, and the original language files are restored. Press the Enter key to initiate the reset. The PIM Master is automatically rebooted as part of this operation. To return to normal operation without resetting, press Esc rather than pressing Enter. Note: This same reset sequence can be initiated when turning the PIM Master On by pressing and holding the System (8)+On keys until the Anritsu splash screen is displayed. Update Firmware Press this submenu key to update the instrument operating system using an external USB drive. Press Enter to begin the update, or press Esc to return to normal operation without updating. Refer to PIM Master Firmware Update for additional information. Back Press this submenu key to return to the System Options Menu. |