Pop‑up list boxes or edit boxes are used to provide selection lists and selection editors. Scroll through a list of items or parameters with the Arrow keys or by using the touch screen. Select numerical values by scrolling with the Arrow keys or by entering the digits directly from the number keypad. These list boxes and edit boxes frequently display a range of possible values or limits for possible values.
Finalize the input by pressing the Enter key. At any time before finalizing the input, press the escape (Esc) key to abort the change and retain the previously existing setting.
Symbols and Indicators
The following symbols and indicators convey the instrument status or condition on the display.
Battery Symbol:
The battery symbol above the display indicates the charge remaining in the battery. The colored section inside the symbol changes size and color with the charge level.
Battery Status – Charged
Green with Black Plug body: Battery is fully charged and external power is applied
Green: Battery is 30 % to 100 % charged
Yellow: Battery is 10 % to 30 % charged
Red: Battery 0 % to 10 % charged
Lightning Bolt: Battery is being charged (any color symbol)
When the battery is charging, either from the AC‑DC Adapter (40‑187‑R) or the 12 Volt DC adapter (806‑141‑R), the symbol changes to that shown in Figure: Battery Status – Charging:
Battery Status – Charging
The Battery Charge LED (refer to Figure: Battery Status – Charged) flashes when the battery is charging, and remains on steady when the battery is fully charged.
Caution
Use only Anritsu‑approved batteries, adapters, and chargers with this instrument. Anritsu Company recommends removing the battery for long-term storage of the instrument.
The battery symbol is replaced by a red plug body to indicate that the instrument is running from external power and is not charging the battery (or to indicate that the battery is not present). When the external AC adaptor is connected, the battery automatically receives a charge, and the battery symbol with the lightning bolt is displayed (Figure: Battery Status – Charging). When the battery is not installed, the red plug body is displayed, as shown in Figure: Battery Not Installed. If the battery is installed but has lost communications with the instrument, then the battery charge indicator will not be shown.
Battery Not Installed
Storage Icon
Storage Icon (FDD)
This shortcut to the Save Menu is an image of a 3.5 inch floppy disk drive (FDD). The icon is located between GPS data and the battery symbol at the top of the display screen. Touch the icon to open the touch screen keyboard for saving measurements, setups, limit lines, or screen display JPEG files (see Figure: Save Dialog Box).
