VectorStar™ MS464xB Series Microwave Vector Network Analyzer Calibration and Measurement Guide : Triple Offset Short (SSST) and Multiple Offset Short (mSSS) Calibrations
 
Triple Offset Short (SSST) and Multiple Offset Short (mSSS) Calibrations
 
SSST Introduction
Related Chapters
SSST and Reflectivity Error Terms
SSST/SSSR Calibration Example
mSSS Calibration
mSSS Calibration Example
SSST Introduction
This chapter describes calibration using the triple offset short (SSST) algorithm. The next step in this progression is to remove the load so that the entire reflection space is defined by three shorts of varying offset lengths. The individual short definitions are the same as for an SOLT calibration.
SSST and Reflectivity Error Terms
SSST/SSSR Calibration Example
A generalization of this approach is multiple offset short (mSSS) where up to 10 different shorts can be used per-portper-port to extend bandwidth and improve immunity to repeatability challenges. This mSSS calibration uses a least-squares solving approach to optimize the weighting of the calculation at each frequency.
mSSS Calibration
mSSS Calibration Example
Related Chapters
The following contains content related to Triple Offset Short (SSST) Calibration:
Reciprocal Measurements