:SENSe{1-16}:CORRection:COLLect:ECAL Subsystem – 4-Port VNAs
The :SENSe{1-16}:CORRection:COLLect:ECAL subsystem commands set the automatic calibration parameters.
:SENSe{1-16}:CORRection:COLLect:ECAL:AUTOmatic:ORIentation[:STATe] <char>
:SENSe{1-16}:CORRection:COLLect:ECAL:AUTOmatic:ORIentation[:STATe]?
Description
Sets automatic Autocal module orientation detection on/off for the indicated channel.
Returns the on/off status of the Autocal module orientation detection on the indicated channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
<char> 1 | 0
Range
NA
Default
NA
Syntax Example
SENS1:CORR:COLL:ECAL:AUTO:ORI ON
SENS1:CORR:COLL:ECAL:AUTO:ORI?
:SENSe{1-16}:CORRection:COLLect:ECAL:BEGin?
Description
Query only.
Starts an Autocal calibration and returns status or next step information.
Cmd Parameters
NA
Query Parameters
<NR1> Outputs one of the following ECAL List of Messages:
0 – AssurancePassed | 19 – CharacBad |
1 – Update | 20 – DisplayMessage |
2 – TrueThru | 21 – ConnectToPort1 |
3 – Adapter | 22 – ConnectToPort2 |
4 – NoModule | 23 – ConnectToPort3 |
5 – NoOrient | 24 – ConnectToPort4 |
6 – NoFile | 25 – ConnectToPorts12 |
7 – NoMatch | 26 – ConnectToPorts13 |
8 – No12T | 27 – ConnectToPorts14 |
9 – NotAllowed | 28 – ConnectToPorts23 |
10 – OutOfRange | 29 – ConnectToPorts24 |
11 – AssuranceFailed | 30 – ConnectToPorts34 |
12 – Aborted | 31 – ConnectThrubwPorts12 |
13 – AbortOK | 32 – ConnectThrubwPorts13 |
14 – AbortNotOK | 33 – ConnectThrubwPorts14 |
15 – ACError | 34 – ConnectThrubwPorts23 |
16 – ACFatalError | 35 – ConnectThrubwPorts24 |
17 – DoneCalculateCoeff | 36 – ConnectThrubwPorts34 |
18 – ACConnectCalB | 37 – SequentialBegins |
Range
NA
Default
NA
Syntax Example
:SENS1:CORR:COLL:ECAL:BEG?
:SENSe{1-16}:CORRection:COLLect:ECAL:CALB:TRUEthru <char>
Description
Sets the on/off state for the use of TrueThrus during Autocal CALB Calibrations on the indicated channel.
No query.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Range
NA
Default
NA
Syntax Example
:SENS1:CORR:COLL:ECAL:CALB:TRUE ON
:SENS1:CORR:COLL:ECAL:CALB:TRUE?
:SENSe{1-16}:CORRection:COLLect:ECAL:CHARacterize?
Description
Query only.
Starts an Autocal characterization and returns status or next step information.
Cmd Parameters
NA
Query Parameters
<NR1> Outputs one of the following ECAL List of Messages:
0 – AssurancePassed | 19 – CharacBad |
1 – Update | 20 – DisplayMessage |
2 – TrueThru | 21 – ConnectToPort1 |
3 – Adapter | 22 – ConnectToPort2 |
4 – NoModule | 23 – ConnectToPort3 |
5 – NoOrient | 24 – ConnectToPort4 |
6 – NoFile | 25 – ConnectToPorts12 |
7 – NoMatch | 26 – ConnectToPorts13 |
8 – No12T | 27 – ConnectToPorts14 |
9 – NotAllowed | 28 – ConnectToPorts23 |
10 – OutOfRange | 29 – ConnectToPorts24 |
11 – AssuranceFailed | 30 – ConnectToPorts34 |
12 – Aborted | 31 – ConnectThrubwPorts12 |
13 – AbortOK | 32 – ConnectThrubwPorts13 |
14 – AbortNotOK | 33 – ConnectThrubwPorts14 |
15 – ACError | 34 – ConnectThrubwPorts23 |
16 – ACFatalError | 35 – ConnectThrubwPorts24 |
17 – DoneCalculateCoeff | 36 – ConnectThrubwPorts34 |
18 – ACConnectCalB | 37 – SequentialBegins |
Range
NA
Default
NA
Syntax Example
:SENS1:CORR:COLL:ECAL:CHAR?
:SENSe{1-16}:CORRection:COLLect:ECAL:CONTinue?
Description
Query only.
Starts an Autocal characterization and returns status or next step information.
Cmd Parameters
NA
Query Parameters
<NR1> Outputs one of the following ECAL List of Messages:
0 – AssurancePassed | 19 – CharacBad |
1 – Update | 20 – DisplayMessage |
2 – TrueThru | 21 – ConnectToPort1 |
3 – Adapter | 22 – ConnectToPort2 |
4 – NoModule | 23 – ConnectToPort3 |
5 – NoOrient | 24 – ConnectToPort4 |
6 – NoFile | 25 – ConnectToPorts12 |
7 – NoMatch | 26 – ConnectToPorts13 |
8 – No12T | 27 – ConnectToPorts14 |
9 – NotAllowed | 28 – ConnectToPorts23 |
10 – OutOfRange | 29 – ConnectToPorts24 |
11 – AssuranceFailed | 30 – ConnectToPorts34 |
12 – Aborted | 31 – ConnectThrubwPorts12 |
13 – AbortOK | 32 – ConnectThrubwPorts13 |
14 – AbortNotOK | 33 – ConnectThrubwPorts14 |
15 – ACError | 34 – ConnectThrubwPorts23 |
16 – ACFatalError | 35 – ConnectThrubwPorts24 |
17 – DoneCalculateCoeff | 36 – ConnectThrubwPorts34 |
18 – ACConnectCalB | 37 – SequentialBegins |
Range
NA
Default
NA
Syntax Example
:SENS1:CORR:COLL:ECAL:CONT?
:SENSe{1-16}:CORRection:COLLect:ECAL:MSGS:LIST?
Description
Query only.
Returns a copy of the Autocal messages list.
Cmd Parameters
NA
Query Parameters
<NR1> Outputs ECAL List of Messages:
0 – AssurancePassed | 19 – CharacBad |
1 – Update | 20 – DisplayMessage |
2 – TrueThru | 21 – ConnectToPort1 |
3 – Adapter | 22 – ConnectToPort2 |
4 – NoModule | 23 – ConnectToPort3 |
5 – NoOrient | 24 – ConnectToPort4 |
6 – NoFile | 25 – ConnectToPorts12 |
7 – NoMatch | 26 – ConnectToPorts13 |
8 – No12T | 27 – ConnectToPorts14 |
9 – NotAllowed | 28 – ConnectToPorts23 |
10 – OutOfRange | 29 – ConnectToPorts24 |
11 – AssuranceFailed | 30 – ConnectToPorts34 |
12 – Aborted | 31 – ConnectThrubwPorts12 |
13 – AbortOK | 32 – ConnectThrubwPorts13 |
14 – AbortNotOK | 33 – ConnectThrubwPorts14 |
15 – ACError | 34 – ConnectThrubwPorts23 |
16 – ACFatalError | 35 – ConnectThrubwPorts24 |
17 – DoneCalculateCoeff | 36 – ConnectThrubwPorts34 |
18 – ACConnectCalB | 37 – SequentialBegins |
Range
NA
Default
NA
Syntax Example
:SENS1:CORR:COLL:ECAL:MSGS:LIST?
:SENSe{1-16}:CORRection:COLLect:ECAL:ORIentation <char>
:SENSe{1-16}:CORRection:COLLect:ECAL:ORIentation?
Description
Sets Autocal module orientation detection off and sets the orientations manually for the indicated channel.
Returns the Autocal module orientations of the indicated channel.
Cmd Parameters
<char> L1 | L2 | L3 | L4 | R1 | R2 | R3 | R4 | L1R2 | L1R3 | L1R4 | L2R3 | L2R4 | L3R4 | R1L2 | R1L3 | R1L4 | R2L3 | R2L4 | R3L4 | R2L1 | R3L1 | R4L1 | R3L2 | R4L2 | R4L3 | L2R1 | L3R1 | L4R1 | L3R2 | L4R2 | L4R3
Query Parameters
<char> L1 | L2 | L3 | L4 | R1 | R2 | R3 | R4 | L1R2 | L1R3 | L1R4 | L2R3 | L2R4 | L3R4 | R1L2 | R1L3 | R1L4 | R2L3 | R2L4 | R3L4 | R2L1 | R3L1 | R4L1 | R3L2 | R4L2 | R4L3 | L2R1 | L3R1 | L4R1 | L3R2 | L4R2 | L4R3
Range
NA
Default
L1R2
Syntax Example
:SENS1:CORR:COLL:ECAL:ORI L2R4
:SENS1:CORR:COLL:ECAL:ORI?
:SENSe{1-16}:CORRection:COLLect:ECAL:PORT{12 | 13 | 14 | 23 | 24 | 34}:FULL4
Description
Sets FULL4 calibration type with the given CALa port set and indicated channel.
No query.
Cmd Parameters
<char> 12 | 13 | 14 | 23 | 24 | 34
Query Parameters
NA
Range
NA
Default
NA
Syntax Example
:SENS1:CORR:COLL:ECAL:PORT12:FULL4
:SENSe{1-16}:CORRection:COLLect:ECAL[:CALa]:TRUEthru <char>
:SENSe{1-16}:CORRection:COLLect:ECAL[:CALa]:TRUEthru?
Description
The command turns on/off the use of TrueThru during Autocal CALa Calibration on the indicated channel.
No query.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
<char> 1 | 0
Range
NA
Default
0
Syntax Example
:SENS1:CORR:COLL:ECAL:TRUE ON
:SENS1:CORR:COLL:ECAL:TRUE?