Segmented Frequency-Based Sweep Setup

FREQ BASE SETUP (FREQUENCY-BASED SEGMENTED SWEEP SETUP) Menu (1 of 2)
	Segmented Frequency Table Display When the FREQ BASE SETUP menu appears, the SEGMENTED SWEEP DEFINITION TABLE display dialog appears at the bottom of the main display area. The table display, described below, allows the configuration of frequency segments for sweep management. • SEGMENTED SWEEP DEFINITION Table Graph Mode (Freq Base/Index Base) The Graph Mode toggle button toggles the graph mode between Freq Base and Index Base. When Freq Base is selected, the display status bar shows Freq Base. Display IFBW (Off/On) Select toggles the IFBW column off and on. If on, the IFBW field is added to the Freq Def. for F1 & F2 table header in the SEGMENTED SWEEP DEFINITION table below. • SEGMENTED SWEEP DEFINITION Table Display Power (Off/On) Select toggles the Power column display off and on. If on, the P1 Src. Pwr (Src. Atten - 0 dB) and P2 Src. Pwr (Src. Atten - 0 dB) columns are added to the Freq Def. for F1 & F2 table header in the SEGMENTED SWEEP DEFINITION table below. • SEGMENTED SWEEP DEFINITION Table Display Averaging (Off/On) Select toggles the Averaging column display off and on. If on, the Averaging field is added to the Freq Def. for F1 & F2 table header in the SEGMENTED SWEEP DEFINITION table below. • SEGMENTED SWEEP DEFINITION Table Add (Freq-Based Segment) The Add button adds a row for a new segment to the Freq Def. for F1 & F2 table information below the currently selected segment. • SEGMENTED SWEEP DEFINITION Table Delete (Freq-Based Segment) The Delete button deletes the currently selected row/segment from the Freq Def. for F1 & F2 table information. • SEGMENTED SWEEP DEFINITION Table
	Clear All Segments (Freq-Based Segment) The Clear All Segments clears all rows except for Row 1 from the Freq Def. for F1 & F2 table information. • SEGMENTED SWEEP DEFINITION Table Save Table to File (Freq-Based Segment) The Save Table to File button saves the table data to a Segment Sweep .sgs file. Select displays the Save Segmented Sweep Table (SGS File) dialog box. • SAVE AS (SEGMENT SWEEP TABLE SGS FILE) Dialog Box Recall Table from File (Freq-Based Segment) The Recall Table from File button recalls table data from a Segment Sweep .sgs file. Select displays the Recall Segmented Sweep Table (Sweep SGS File) dialog box. • RECALL SEGMENTED SWEEP TABLE SGS FILE Dialog Box

This is table display with all fields showing.

The Freq Def. for F1 & F2 drop-down menu allows each segment to be set as either a Stop & Start, Start & Step Size, or CW (F2 not used).

The Display IFBW button on the Freq Base Setup menu causes the IFBW column to disappear and appear.

The Display Power button on the Freq Base Setup menu causes the Power columns to disappear and appear.

The Display Averaging button on the Freq Base Setup menu causes the Per Point Averaging column to disappear and appear.

Selecting the Add button on the Freq Base Setup menu adds a row to the tableau so that another frequency segment can be added.

To add additional rows, repeat selecting the Add button. Note that the currently selected and editable row is indicated by the left arrow, as shown in Row 3

below.

Select a row to delete it. A selected row is indicated by the right-facing arrow icon as shown for Row 2 below:

Click the Delete button on the Freq Base Setup menu to delete the row:

SAVE AS (SEGMENT SWEEP TABLE SGS FILE) Dialog Box

RECALL (SEGMENTED SWEEP TABLE SGS FILE) Dialog Box


	Anritsu Company 1-800-ANRITSU 10450-00040 Rev. AD