Select toggles the main display from the system default off and on. From the default state, the first click inverts background color from black to white. A second click changes the background to the factory default setting of black background.
Reset Colors
Select displays the RESET Colors dialog box to confirm the reset. Click Cancel leave the colors as is. Click OK to reset the all colors to the factory default setting.
• MAIN | System | SYSTEM | Setup | SETUP | Color Setup | COLOR SETUP Dialog Box
COLOR SETUP Dialog Box
Modifying Default Colors
Use the Color Setup dialog box to assign colors in:
• Normal Mode for Background, Graticule Main, Graticule Sub, Limit Lines, and each trace.
• Invert Color Mode for the same elements.
Color Setup
To change Background, Graticule Main, Graticule Sub, and Limit Line colors, click on the color block to display the Color Pallet dialog box. To change the trace color, click on the trace number such as Tr1. To save a color assignment, click OK or click Cancel to exit.
Limit Line System/Per Trace Radio Buttons
• System – Select any one color for all limit lines (both Normal and Invert).
• Per Trace – Select limit line color for each trace (both Normal and Invert). The selected color for each trace is applied to the limit lines for the corresponding trace in all the channels.
