Anritsu RF and Microwave Handheld Analyzers Product Information, Compliance, and Safety : Regulatory Compliance
 
Regulatory Compliance
 
Compliance Notifications
CE Conformity Marking
European Parliament and Council Directive 2012/19/EC
RCM Conformity Marking
KCC Conformity Marking
Recycle Marking
Perchlorate Material Notification – Special Handling May Apply
Chinese RoHS Compliance Statement
Following compliance notices and declarations of conformity apply to the products listed in Applicable Product Models.
This equipment is categorized as Class A devices as noted below:
A device marketed for use in an industrial application and is not intended for use in the home or residential area is classified as Class A. Class A equipment, commonly known as ISM (industrial, scientific, and medical) equipment, are for professional use in engineering and scientific applications commanding specialized training and good understanding of the English language. Products being sold in a commercial market for such applications have significantly less stringent emissions limits than Class B (residential) devices.
A device that is marketed for use in the home or a residential area by the customer is classified as a Class B device. Class B verification is for devices that are marketed for in-home use, but are not permanently connected to a personal computer.
Compliance Notifications
Note 
Depending on the economic region/area that your equipment is marketed for, certain labels may not be applicable. Please refer to the markings affixed to your equipment.
CE Conformity Marking
Anritsu affixes the CE Conformity marking onto its conforming products in accordance with Council Directives of the Council Of the European Communities in order to indicate that these products conform to the EMC, LVD, RoHS, and RED directives of the European Union (EU).
European Parliament and Council Directive 2012/19/EC
Equipment Marked with the crossed-out Wheelie Bin symbol complies with the European Parliament and Council Directive 2012/19/EC (the “WEEE Directive”) in the European Union.
For Products placed on the EU market after August 13, 2012, please contact your local Anritsu representative at the end of the product’s useful life to arrange disposal in accordance with your initial contract and the local law.
RCM Conformity Marking
Anritsu affixes the Regulatory Compliance Mark (RCM) onto its conforming products in accordance with the electromagnetic compliance regulations of Australia and New Zealand in order to indicate that these products conform to the EMC regulations of Australia and New Zealand.
KCC Conformity Marking
Anritsu affixes the Korean Communications Commissions (KCC) mark onto its conforming products in accordance with the electromagnetic compliance regulations of Korea
Recycle Marking
Anritsu affixes the universal recycle symbol onto its products to indicate that the marked part is made from recyclable materials and should be recycled. Materials should be recycled in accordance with your local regulatory requirements.
Proposition 65 Notification
Notification for California customers: Chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm may be present in the products listed in Applicable Product Models or their related accessories. For information, see: https://oag.ca.gov/prop65
Perchlorate Material Notification – Special Handling May Apply
Notification for California customers: this product uses a small Lithium battery installed internally on the circuit board that may contain perchlorate. Disposal may be regulated due to environmental considerations. Please contact your local authorities for disposal or recycling information. For information, see: http://www.dtsc.ca.gov/hazardouswaste/perchlorate
Chinese RoHS Compliance Statement
MT8220T, MT8212E, MT8213E, S331E, S332E, S361E, S362E, S331L, S412E, S820E, MW82119B, MS2711E, MS2712E, MS2713E, MS2720T, MS2024B, MS2025B, MS2026C, MS2027C, MS2028C, MS2034B, MS2035B, MS2036C, MS2037C, MS2038C