Power Meter Measurement Guide : Inline Peak Power Sensor MA24105A : Video BW Menu
 
Video BW Menu
Key Sequence: Limit > Video BW
Video BW Menu
Refer to the Peak Envelope Power submenu key in the Forward Menu.
Full
Press this submenu key to set Full as the video bandwidth of the PEP (Peak Envelope Power) circuit1 of the MA24105A Inline Peak Power Sensor.
4 kHz
Press this submenu key to set 4 kHz as the video bandwidth of the PEP (Peak Envelope Power) circuita of the MA24105A Inline Peak Power Sensor.
200 kHz
Press this submenu key to set 200 kHz as the video bandwidth of the PEP (Peak Envelope Power) circuita of the MA24105A Inline Peak Power Sensor.
 
 
 
Back
Press this submenu key to return to the Limits menu.

1  PEP circuits are used on the following measurements: Peak Envelope Power, Crest Factor, CCDF, and Burst Average Power (Auto Mode).