This SCPI Programming Manual provides information for remote operation of the MT8220T High Performance Base Station Analyzer using commands sent from an external controller via Ethernet or USB connection. This Programming Manual includes the following:
• An overview of Ethernet and USB connection to the BTS Master.
• An overview of Standard Commands for Programmable Instruments (SCPI) command structure and conventions.
• The IEEE common commands that are supported by the MT8220T.
• A complete listing and description of all the SCPI commands that can be used to remotely control functions of the BTS Master. The commands are organized by instrument mode starting in All Mode Commands.
This manual is intended to be used in conjunction with the MT8220T User Guide, P/N: 10580‑00366. Refer to that manual for general information about the MT8220T, including equipment setup and operating instructions.
Introduction
This chapter provides a general description of remote programming setup and interface connections using Ethernet or USB, and sending SCPI commands to the instrument.