Figure: Spectrum Analyzer Display illustrates the BTS Master interface screen in Spectrum Analyzer mode, with touch screen menu keys, title bar, and measurement settings and results around the graph area, or sweep window.
Many of the measurement settings displayed to the left and the top of the sweep window are actually touch screen shortcuts that you can press to bring up the corresponding menu.
Spectrum Analyzer Display
1
Real Time Clock
2
Data Summary, Active Marker Values
3
Current Location Data, Latitude and Longitude Using GPS
4
Shortcut to the Save Submenu
5
Measurement Display or Measurement Grid or Sweep Window
6
Battery Charge Indicator
7
Instrument Mode (shortcut to Current Measurement Submenu)
8
Submenu Keys or Active Function Block
9
Main Menu Keys
10
Optional Data Window (also location of Marker Table)
11
Instrument Settings Summary (shortcuts to Menus and Submenus)
Touch Screen Keys
Main Menu Touch Screen Keys
There are five main menu keys horizontally arranged along the bottom of the interface screen. These keys give access to the instrument’s test and measurement functions, which are documented in the applicable Measurement Guide. Refer to Measurement Guides.
Different operation or measurement modes may display different main menu keys. To switch to another mode, press the Menu key, or press Shift followed by the Mode (9) key.
Note
The instrument model and installed options determine what measurement modes are available. Refer to Table: Available Options.
Submenu Touch Screen Keys
Most of the instrument setup, control, and measurement functions are performed through the use of the submenu keys along the right side of the display. The key labels change as measurement settings and instrument setup parameters change. The current submenu title is displayed at the top of the submenu key block, which consists of up to eight touch screen keys. See Figure: Spectrum Analyzer Display.
