 | |
1. | Preset –90 dBm Lower Limit |
2. | Power Range of Attached Sensor |
3. | Power Meter Needle |
4. | High Accuracy Power Meter Mode and Connected USB Sensor |
5. | Preset +90 dBm Upper Limit |
6. | Current Power in dBm and Watts (including any Offset Value) or “No USB sensor detected” if an external USB sensor is not connected or recognized by the Site Master. |
7. | Relative Power (dB and %) or Absolute Power (dBm and Watts) |
8. | Offset Value to Account for External Attenuation or Gain |
9. | Source Frequency Used for Correction Factor |