Anritsu Products, such as the MS2090A, have built-in Wi-Fi and do not require a router to be remotely connected to a PC/tablet running the MIH software. A hotspot or access point is required for communications to take place. To learn more about your Spectrum Analyzer and the Wi-Fi connection, visit the Anritsu Product Page at: https://www.anritsu.com/en-US.
Configure the Spectrum Analyzer
1. Connect the PC/tablet used with MIH to a hotspot.
2. Test the connection by using a Ping command to log into the IPV4 IP address.
3. Locate the Wi-Fi connectivity setting of your spectrum analyzer.
4. Activate the Wi-Fi setting of the spectrum analyzer. Once Wi-Fi is active, a listing of the SSID names will appear based on the Wi-Fi signals that are present.
5. Click the SSID name corresponding to the SSID of your hotspot.
Test the connection to MIH
1. Click Settings at the top of the MIH screen.
2. Click on the Spectrum Analyzer Connection in the menu list.
3. Click on the Test Connection button. You should then receive a message back that the test has passed. A successful connection dialog with the analyzer IP address will display similar as shown in Figure: MIH Connection Setup Dialog.
