Component | Definition |
Maximum Hold/Rolling | The maximum power ever displayed per channel can be turned on/off. Trace is red. When 'Rolling' is selected, a rolling maximum average is displayed. |
Minimum Hold/Rolling | The minimum power ever displayed per channel can be turned on/off. Trace is green. When 'Rolling' is selected, a rolling minimum average is displayed. |
Average | The average power displayed per channel can be turned on/off. |
Average Count | The number of traces used to determine Average. |
Current | Turns on/off the active trace from view. By default, the box is checked. |
Data Marker | Turns data markers on/off. When Data Marker is selected, the user can move the mouse across trace screen to observe amplitude and frequency points. |
Horizontal Marker | Turns horizontal markers on/off. Place the mouse cursor on the trace display. Holding down the Shift key, click the left mouse button to set the marker at the desired position.Remove the line by holding Shift and clicking the right mouse button. |
Vertical Marker | Turns vertical markers on/off. Hold down Ctrl and place the mouse cursor on the trace display. Click the left mouse button at the desired frequency. Remove the line by holding Ctrl key and clicking the right mouse button. |
Update Interval(s) | The slider modifies the update rate of the spectrum displayed. This option becomes important if a low bandwidth connection is used and the monitoring overhead has to be minimized. |