After successfully defining power display, the power chart over time section could look like that which is illustrated in number 4 in Figure: Power Monitoring View.

A power chart may not fit in it's display view completely. Each power chart display can have the scale adjusted by clicking Fit. Clicking X removes the chart display from view. It can be restored again by re-checking it's visibility from the Power Settings window.

While measuring power, you can change to another mode but the power measurement will stop. Upon returning to the power monitoring mode, the measurement continues. Any discontinuation (e.g. change of mode or stop/start power measurement), will be illustrated by red vertical dotted lines in each power chart.

Sometimes it can be advantageous to change the order of the power charts. You can change the order by clicking the header area of one chart and dragging it over another chart to modify the order.