SpectraVision™ Software : Demo Signals : Demo Satellite Signal
 
Demo Satellite Signal
1. Select Demo Satellite from the drop-down list for Device Type.
2. Click Connect. See red highlights in Figure: Device Type Drop-Down List: Demo Satellite Selected.
Device Type Drop-Down List: Demo Satellite Selected
3. Select the Satellite icon (option 471) under the Modes tab. See Figure: Satellite -471 Mode Selected.
Satellite -471 Mode Selected
4. Close the Device Settings window.
 
5. Fill in Center frequency of 1501 MHz and Bandwidth of 40 MHz. Insure that DVB-S2 is highlighted.
6. After clicking Start, you should see the following screen Figure: Demo Satellite Signal with Identification Results.
Demo Satellite Signal with Identification Results
 
Note 
Signal quality metrics are displayed in the bottom right window. For satellite signals whose bandwidths are 20 MHz or less, constellation diagrams are also shown.
 
Note 
Signal parameters metrics over time can be seen in the bottom left window. One can use this information to track signal degradation over time, in many cases before a catastrophic failure develops.
7. Click the Export button to generate a PDF or CSV report.