S331P Site Master™ Programming Manual : General Information
General Information
Remote Operation Setup and Interface
Ethernet Interface Connection and Setup
Sending SCPI Commands
Ethernet Connectivity
This SCPI Programming Manual provides information for remote operation of the Site Master S331P Cable and Antenna Analyzer using SCPI commands sent from a user application on an external controller through an Ethernet connection or on the local S331P controller.
This Programming Manual includes the following:
An overview of the Ethernet connection to the instrument.
An overview of Standard Commands for Programmable Instruments (SCPI) command structure and conventions.
The IEEE common commands that are supported by the instruments.
A complete listing and description of all the SCPI commands that can be used to remotely control functions of the instrument. The commands are organized by measurement mode starting in All Mode Commands.
This manual is intended to be used in conjunction with the Site Master S331P User Guide. Refer to the instrument user guide for general information about the instrument, including equipment setup and operating instructions. This chapter provides a general description of remote programming setup and interface using Ethernet, and sending SCPI commands to the instrument.