The Site Master S331P can display two different measurements simultaneously by setting the Display Format to Dual, then selecting the measurement to display.
Different amplitudes, limit lines, and markers can be set for each display. If the marker table is turned on in dual display mode, the markers for only the active display are shown in the table.
Setting Single or Dual Display
1. Press the Measurement main menu key.
2. Toggle the Display Format submenu key so that it is set to Dual.
3. Change the active measurement by tapping directly on the graph. The red outline around the graph indicates the active display.
Dual Display Format with Top Display Active
Saving Measurements in Dual Display
When saving a file while in dual display mode, both traces are saved in a single measurement file. The default file name will contain references to both trace types, but you can change the name, as with any file. Refer to File Name.
