Vision™ MX280001A Software Help : TDoA Locate (Option 401) : Using TDoA : TDoA Capture Settings
 
TDoA Capture Settings
Enter the TDoA Capture Settings section is shown below in Figure: TDoA Capture Settings.
TDoA Capture Settings
The TDoA Capture Settings section is described in Table: Capture Settings.
Capture Settings
Icon
Description
Center Freq
Type the center frequency and then select the frequency terminator.
Capture BW
Click to open the Capture BW frequency list and select the frequency.
Automatically set reference level
Click the check box to set reference levels automatically.
 
Wait for signal peak
Click to enter a check-mark to set - Wait for signal peak.