Field Master Pro™ MS2090A User Guide : ARRT Software
 
ARRT Software
Introduction
The Anritsu Remote and Report Tools (ARRT) software package is a combination of two software applications; Anritsu Remote Tool and Anritsu Report Tool.
The Anritsu Remote Tool provides remote access to a network connected instrument and displays the instrument’s user interface, setup parameters, and live measurement data on the computer screen.
The software also allows you to load measurement and setup data from saved files and then perform measurement analysis on the recalled traces, even when instrument hardware is not available or is not connected to the computer by using the Simulation Mode (refer to Connecting to the MS2090A or Simulation Mode). The user interface provides the same functionality when an instrument is connected with a few exceptions:
• File operations will interface with the PC file system rather than on the instrument and save on event operations will be saved to the instrument memory (refer to FILES (File Management)).
• In Real Time Spectrum Analyzer (RTSA) mode, the display density is shown like that of the instrument.
Connecting to the Simulation Mode is like connecting to an instrument so there is no expectation of carrying over settings or trace data from one to the other. The Simulation Mode will include option controlled functionality with most options automatically enabled (refer to Working with Simulation Mode).
The Anritsu Report Tool provides the capability of generating PDF reports and analyzing supported measurements by setting markers, limits, etc. Refer to Anritsu Report Tool User Guide (PN:10580-00505) for detailed information on how to use the software.
 
Note 
Vector Network Analyzer (VNA) and Vector Voltmeter (VVM) measurements for example, .smvna and .smvvm are not supported by Anritsu Report Tool.
PC Configuration Requirements
The remote user interface application running on a computer as requires the following:
• Intel Core i5 Processor or higher
• 8 GB RAM
• Windows 10 or higher, 64-bit
• 1 GB Hard Disk
• Open GL (ES) 2.0 support
• 1280 x 800 resolution
• Ethernet or Wi-Fi (for connecting to Field Master Pro instrument)