Field Master Pro™ MS2090A Programming Manual : Programming with SCPI
 
Programming with SCPI
 
Scope of Manual
Additional Documentation
Introduction
Remote Programming Setup and Interface
Network Interface Connection and Setup
USBTMC Interface Connection and Setup
Sending SCPI Commands with NI-VISA
SCPI Command Overview
Command Names
Command Syntax
Data Parameters
Spectrum Trace Data Format
Unit Suffixes
Query Commands
Hierarchical Command Structure
SCPI Command Types
SCPI Common Commands
*CLS
*IDN?
*RST
SCPI Required Commands
SCPI Optional Commands
Status System Reporting
Status Group Registers
Status Group Reporting
SCPI Commands
SCPI Command Programming Examples
Notational Examples
Application Mode Switching
Spectrum Trace Data via SCPI
C/C++
IQ Capture Programming Examples
Scope of Manual
This manual provides SCPI programming information and a list of SCPI programming commands for the Anritsu MS2090A Field Master Pro™ Spectrum Analyzer.
Additional Documentation
Related Manuals
Document Part Number
Description
10100-00069
Important Product Information, Compliance, and Safety Notices
11410-01000
MS2090A Field Master Pro™ Technical Data Sheet
10580-00444
MS2090A Field Master Pro™ User Guide
10580-00447
Spectrum Analyzer Measurement Guide
Tracking Generator (Option 20)
Interference Finder (Option 24)
AM/FM Modulation Measurement (Option 509)
Zero Span IF Output (Option 89)
Gated Sweep (Option 90)
Coverage Mapping (Option 431)
EMF Measurement (Option 444)
10580-00448
RTSA Measurement Guide (Option 199)
Interference Finder (Option 24)
10580-00449
5GNR Measurement Guide (Option 888)
Gated Sweep (Option 90)
Coverage Mapping (Option 431)
10580-00450
LTE Measurement Guide (Option 883)
Gated Sweep (Option 90)
Coverage Mapping (Option 431)
10580-00451
Pulse Analyzer Measurement Guide (Option 421)
10580-00489
EMF Meter Measurement Guide (Option 445)
10580-00490
IQ Capture/Streaming Measurement Guide (Options 124/126 and Options 125/127)
10580-00492
High Accuracy Power Meter Measurement Guide (Option 19)
10580-00493
Cable and Antenna Analyzer Measurement Guide (Option 331)
10580-00501
WCDMA Measurement Guide (Option 871)
10580-00504
Channel Scanner Measurement Guide (Option 27)
10580-00505
Anritsu Report Tool User Guide
Updates, if any, can be downloaded from the Library tab on the Anritsu product page:
https://www.anritsu.com/en-us/test-measurement/products/ms2090a
Introduction
This chapter provides an introduction to Standard Commands for Programming Instruments (SCPI). The SCPI standard defines a set of programming commands and standards for use by all SCPI compatible instruments. SCPI is intended to provide a consistent environment for program development. It does so by defining standardized controller messages, instrument responses, and message formats for all SCPI compatible instruments. The following sections include descriptions of the command types, hierarchical command structure, command subsystems, data parameters, and notational conventions with examples.