Rubidium™ MG362x1A SeriesLow-Noise RF/Microwave SignalGenerators : Instrument Overview : Entering Data : Text Entry
Text Entry
When an instrument function requires you to enter text, such as entering an Ethernet hostname, a touch screen alphabetic keyboard is displayed. See Figure: Touch Screen Keyboard. Press the “?123” button to toggle to the digits and symbols keyboard. Use the left arrow button (backspace) to delete the character to the left of the insertion point. The insertion point can be moved to a touched position in the data entry field. You can enable caps lock by double tapping the shift button.
Touch Screen Keyboard
The EZ button toggles to a configurable EZ keyboard, illustrated below.
Touch Screen EZ Keyboard
Use the EZ keyboard to enter frequently used text strings with a single screen tap. The EZ keyboard is initially populated with default values. Each button enters the entire string as shown on the key. For convenience, you can set an automatic Separator character to be placed between each EZ key string.
To change a key’s value:
1. Press the pencil (edit) button. The EZ buttons will become highlighted.
Touch Screen EZ Keyboard
2. Press the button to be edited. This will display the standard keyboard for entering a new EZ key value.
Touch Screen EZ Keyboard
Enter the new value, then press ACCEPT to assign the new value to the EZ button, or press CANCEL.