Reference CALIBRATION Menu

Rubidium™ MG362x1A SeriesLow-Noise RF/Microwave SignalGenerators : Instrument Operation : Reference CALIBRATION Menu

The reference calibration function provides calibration of the internal 10 MHz or 100 MHz references of the MG362x1A using an external 10 MHz, 0 to +10 dBm reference signal.
(References available are Option dependent)

Press: SYSTEM | REFERENCE | CALIBRATION

The CALIBRATION menu is shown in Figure: CALIBRATION Menu.

Note	Before beginning calibration, allow the MG362x1A to warm up for a minimum of 120 hours.

CALIBRATION Menu

START CALIBRATION Initiates the reference source calibration. 100 MHz and 10 MHz CALIBRATION DATE Provides the last date a reference source calibration was successfully performed.


	Anritsu Company 1-800-ANRITSU 10450-00072, Rev. B