Rubidium™ MG362x1A SeriesLow-Noise RF/Microwave SignalGenerators : Instrument Operation : Reference Status Conditions : Increment Size
Increment Size
Set the incremental size for editing CW frequencies and fixed power level. When the increment mode is set to on, these parameter values will increase or decrease by the set amount each time the front panel
or pad is pressed or the rotary data knob is turned clockwise or counter-clockwise. This menu also lets you turn the increment mode on and off.
Open the parameter you wish to change, then edit the current value using the cursor control keys, rotary data knob, or enter a new value using the key pad and appropriate termination key. When you have finished setting the open parameter, close it by pressing its menu soft key or by making another menu selection.
The increment size set provides the default frequency and power level change when using the keypad arrow keys or the rotary knob of the MG369x1A.
Press the Increment Mode slider to turn the increment mode on as shown in Figure: INCREMENT Menu. Press Increment Mode again to turn it off.
Increment Mode
Activates FREQUENCY STEP and POWER STEP increment size settings when toggled on.
Press to open the frequency increment size parameter. Range is 1 Hz to 10 MHz
Press to open the power level increment size parameter. Range is 1 dB to 10 dB.