Rubidium™ MG362x1A SeriesLow-Noise RF/Microwave SignalGenerators : Native Programming : Output Commands
 
Output Commands
Table: Output Commands (1 of 3) lists the output command mnemonic codes. These commands provide for the output of data from the CW generator to the controller is enabled and detected.
Output Commands (1 of 3)
Mnemonic Code
Function
*IDN?
Requests device identification.
OEM
Returns the Extended SRQ Mask bytes (3 binary bytes) to the controller.
OES
Returns the GPIB Status bytes (3 binary bytes, no terminator) to the controller.
OPP
Returns the internal pulse period value (in µs) to the controller.
OSB
Each Primary byte status reporting bit returns the primary GPIB Status byte (1 binary byte, no terminator) to the controller. Each extended status reporting bit is enabled and detected.
OSR
Returns the self-test results (6 binary bytes, no terminator) to the controller.