: Updating Firmware : Introduction : Use the MG362x1A WEB UPDATES Menu
 
Use the MG362x1A WEB UPDATES Menu
1. Apply power to the MG362x1A.
2. Verify the MG362x1A is connected to the network and has been given an IP address. See SETTINGS Menu.
3. Touch the front panel menu sequence as: 3-Line Menu| SYSTEM INFORMATION | SOFTWARE
4. Touch the WEB UPDATES button to the on position as shown in Figure: Web Updates Button to automatically check the for Anritsu website for updates.
Web Updates Button
If an update is available, the software update icon will appear on the taskbar as shown in Figure: Software Update Icon.
Software Update Icon
5. Touch the software update icon to display the SOFTWARE UPDATE window as shown in Figure: Software Update Dialog.
Software Update Dialog
6. Touch the Available Updates drop down. If multiple versions of MG362x1A firmware are available, select the correct firmware version.
7. Touch INSTALL.
8. The SOFTWARE UPDATE PROGRESS dialog is displayed as shown in Figure: Software Update Progress Dialog. The installation process may take a few minutes to complete.
9. When the software upgrade is complete, touch RESTART INSTRUMENT.
Software Update Progress Dialog
10. The MG362x1A will reboot with the updated firmware installed.
11. Verify that the Package Version firmware as shown in Figure: Web Updates Button shows the most recent version firmware is installed.
The WEB UPDATES button can remain in the on position to alert of future firmware updates when the MG362x1A is connected to the Web. When a new update is available, the software update icon will display on the taskbar as shown in Figure: Software Update Icon.