: Software Option Upgrades : Upgrade Procedure
 
Upgrade Procedure
Upgrading software options on MG362x1A consists of two main steps:
1. Export and send the unit's configuration file to Anritsu.
2. Import the new license file provided by Anritsu
Exporting a Software Configuration File
Exporting the configuration file:
1. Insert a FAT-32 formatted USB memory device into the instrument. If using the remote GUI, insert the USB memory device into the PC.
2. Open the System menu from the upper left 3-bar icon.
3. Use the OPTIONS Menu to save the instruments configuration file.
4. Navigate to Settings > Options menu.
5. Touch SAVE CONFIG at the lower left of INSTALLED OPTIONS.
6. Save the configuration file to a USB memory device, preserving the default filename. The filename will be in the format of MG362x1A_XXXXXXX.config on the USB drive when the operation is complete.
7. Email the file to your Anritsu Customer Service representative at: https://www.anritsu.com/contact-us.
Importing Software License
Importing a new license file:
1. After receiving a new license file from Anritsu, place the file on the USB memory device in the top (root) level. Not in any directory.
2. Insert the FAT-32 formatted USB memory device into the instrument. If using the remote GUI, insert the USB memory device into the PC.
3. Open the System menu from the upper left 3-bar icon.
4. Navigate to Settings > Options menu
5. Touch ENABLE OPTIONS USING FILE at the lower right of INSTALLED OPTIONS.

The instrument GUI (or remote GUI) will search for a valid license file on the USB memory device and apply the changes to the system.
Reboot the instrument and ensure all changes are applied.