: Instrument Overview : REMOTE Settings : RESET Menu
 
RESET Menu
The RESET menu is shown in Figure: RESET Settings.
Press: 3-Line Icon | SETTINGS | RESET
RESET Settings
SETTINGS RESET
 
FACTORY RESET: Restores the instrument to the factory default settings for all measurement modes and system settings, including language and the display and audio settings. Ethernet settings and user files are not affected. The instrument will automatically restart.
FILE RESET
 
DELETE USER FILES: Deletes all user files from the instrument’s internal memory, including measurement, setup, and screenshot files. System files are not affected.
DELETE SYSTEM FILES: Deletes all user system files from the instrument’s internal memory, including keyboard EZ names, cable and antenna s, and log files. Other user files are not affected.
RESET ALL
 
RESET ALL: Performs a Factory Reset as described above and deletes all user files and system files from the instrument’s internal memory. The RESET ALL function overwrites all information stored in the non-volatile memory with default values. This includes the table of 2000 frequency/ sets used for the sweep mode and the five power-offset tables used for the user level flatness correction function. The sweep is defined by a start index and stop index. The instrument will automatically restart.
 
Resetting to Default Parameters
You can reset the MG362x1A to the factory-selected default parameter values at any time during normal operation. To reset to Factory Reset, refer to RESET Menu. Table: Reset (Default Parameters), shows the default parameters for all MG362x1A models.
Note 
Resetting the instrument clears the current setup parameters. If these parameter values are needed for future testing, save them as a stored setup before resetting the signal generator.
The are two ways to reset the instrument.
Press: SYSTEM | RESET | SYSTEM RESET | FACTORY RESET
or
Press: 3-Line Icon | SETTINGS | RESET | FACTORY RESET
 
Reset (Default Parameters)
Model
Number
Frequency Parameters (GHz)
F0
F1
F2
F3
F4
F5
F6
F7
F8
F9
MG36221A
3.5
2.2
20.0
2.2
5.0
8.0
11.0
14.0
17.0
20.0
MG36241A
3.5
2.2
43.5
2.2
5.0
8.0
11.0
14.0
17.0
20.0
MG36271A
3.5
2.2
70.0
2.2
5.0
8.0
11.0
14.0
17.0
20.0
 
Model Number
Parameters (dBm)
L0
L1
L2
L3
L4
L5
L6
L7
L8
L9
MG362x1A
+1.0
0.0
–1.0
–2.0
–3.0
–4.0
–5.0
–6.0
–7.0
–8.0
Model Number
Sweep Time
Step Sweep
Level Sweep
Level Offset
Dwell Time
Number
of Points
Dwell Time
Number
of Steps
MG362x1A
50 ms
1 ms
1000
1 ms
1000
0.0 dB