: Instrument Operation : Frequency Step Sweep Operation : Setting PRESET SWEEP RANGE
 
Setting PRESET SWEEP RANGE
To set the sweep range frequency parameters:
Press: SWEEP | STEP | PRESET SWEEP RANGE.S
The Sweep Range menu is shown in Figure: RANGE Menu.
Press F1-F2: Provides a frequency sweep between the start frequency, F1, and the stop frequency, F2.
Press F3-F4: Provides a frequency sweep between the start frequency, F3, and the stop frequency, F4.
Press F5-DF: Provides a symmetrical frequency sweep about the center frequency, F5. The sweep width is determined by the dF frequency parameter.
Press F6-DF: Provides a symmetrical frequency sweep about the center frequency, F6. The sweep width is determined by the dF frequency parameter. The Delta Frequency can be applied to any F0 - F9 frequency.
Press a preset sweep range parameters as F1 -F2, F3-F4, F5-F6 and DF (Delta Frequency).