:
Instrument Operation
Instrument Operation
Introduction
Power-on Display
Standby Mode
Self Testing the MG362x1A
Resetting to Default Parameters
CW Frequency Operation
FREQUENCY Menu
Phase Offset Menu
FREQUENCY PRESETS Menu
Frequency Sweep Operation
SWEEP Menu
Analog Sweep (Option 6)
Editing the Current Start/Stop Frequencies
Setting PRESET SWEEP RANGES
Setting Sweep Time
Trigger Menu
RANGE Menu
Frequency Step Sweep Operation
SWEEP Menu
SUMMARY Menu
Step Sweep SETUP Menu
Editing the Current Start/Stop Frequencies
Setting the Step Size
Number of Points
Setting DWELL TIME
Setting SWEEP DIRECTION
Setting PRESET SWEEP RANGE
RANGE Menu
Setting SWEEP TYPE
Starting a Step Sweep
TRIGGER Menu
Sweep TRIGGER TYPES
Initiate Step Sweep
LIST Menu
SWEEP LIST Index
LIST TRIGGER Menu
LIST - LIST Menu
Copy to the LIST
Power Level Operations
LEVEL Menu
LEVEL SETUP Menu
Units
LEVEL PRESETS Menu
Setting Fixed Power
Setting a Preset Power Level.
LEVEL OFFSET Menu
Edit the Offset Value
Power Level Sweep Operation
LEVEL SWEEP Menu
Setting CW Power Sweep, Step Size, and Dwell Time
Triggering a CW Power Sweep
RANGE Menu
Setting a Power Level Sweep Range
Setting SWEEP TYPE
Setting the ALC Control
ALC Menu
ALC Level Modes
ALC Power Slope
Step Attenuator (Option 2)
ATTENUATOR Menu
Decoupling the Attenuator
POWER SEARCH Menu
Modulation
Amplitude Modulation
Setting AM SOURCE
Amplitude Modulation Set to Internal
Amplitude Modulation Set to External
Frequency Modulation
Setting FM SOURCE
Frequency Modulation Set to Internal
Frequency Modulation Set to External
Phase Modulation
PHASE Modulation Set to Internal
PHASE Modulation Set to External
Pulse Modulation
Setting Pulse SOURCE
PULSE Modulation Set to Internal
Setting Period and (PRF) FREQUENCY
Pulse Width-Delay Menu
PULSE Modulation Set to External
Phase Tracking
Saving/Recalling Instrument Setups
Saving Setups
Erasing Stored Setups
Reference CALIBRATION
100 MHz Calibration (Standard Reference)
10 MHz Calibration (Option 3)
100 MHz Calibration
100 MHz Status
10 MHz Calibration With Option 66
RUBIDIUM Menu (Option 56)
GNSS Menu (Option 66)
Reference Status Conditions
Reference Oscillator Current Source
Reference Oscillator Lock Status
Reference Oscillator 100 MHz Lock Status
Reference Oscillator GPS Lock Status
Reference Oscillator Rubidium Lock Status
Config Menu
Secure Mode
Increment Size
RESET Menu