: Instrument Operation : Step Attenuator (Option 2) : ATTENUATOR Menu
 
ATTENUATOR Menu
In MG362x1A signal generators equipped with Option 2 step attenuators, the ALC and attenuator work in conjunction to provide leveled output power range of –130 dB. The Attenuator menu is shown in Figure: Attenuator Menu. For more on power leveling and step attenuator settings, see Power Level Operations.
Press: LEVEL | ATTENUATOR
Attenuator Menu
Auto Attenuation
Toggle between coupled and decoupled attenuation mode. Decoupling the attenuator enables attenuation parameter entry.
ATTENUATION
Applies only to devices equipped with an internal step attenuator Option 2. The attenuation parameter can only be changed in decoupled attenuation state. Increase or decrease attenuation in 10 dB steps by using up or down keys on the key pad. Range is 0 dB to –110 dB
ZERO
Set the attenuation to 0 dB. Only available in decoupled attenuation state.