: Instrument Operation : Reference CALIBRATION
 
Reference CALIBRATION
The reference calibration function provides calibration of the internal 10 MHz or 100 MHz references of the MG362x1A using an external 10 MHz, 0 to +10 dBm reference signal.
(References available are Option dependent)
Press: SYSTEM | REFERENCE | CALIBRATION
The CALIBRATION menu is shown in Figure: CALIBRATION Menu.
Note 
Before beginning calibration, allow the MG362x1A to warm-up for a minimum of 120 hours.
CALIBRATION Menu
START CALIBRATION
Initiates the reference source calibration.
100 MHz and 10 MHz CALIBRATION DATE
Provides the last date a reference source calibration was successfully performed.