: Instrument Operation : Reference CALIBRATION : 10 MHz Calibration (Option 3)
 
10 MHz Calibration (Option 3)
To calibrate the 10 MHz internal reference:
1. Connect an external 10 MHz reference signal to the MG362x1A rear panel 10 MHz REF IN connector, or connect a 1PPS signal to the rear panel PPS BNC connector.
2. Press the START CALIBRATION button to display the dialog shown in Figure: 10 MHz Calibration Dialog.
3. Press CONTINUE to start the calibration. The status bar will display Reference Calibration in Progress. When complete, the CALIBRATION DATE will update.
10 MHz Calibration Dialog