The LIST - LIST MENU provides a list index that identifies each frequency/power level set in the list. The list sweep menu consists of a 4000 (0 to 3999) rows of listed start index and stop index. Scroll through the list and edit the paired frequencies and power levels. Use the cursor control keys to select a frequency or power level from the list.
Select the index number of the frequency and level pair. Enabled only in manual trigger source.
DELETE
Selects the sweep start index. Enabled in all trigger modes.
EDIT FREQ
Selects the sweep stop index. Enabled in all trigger modes.
EDIT LEVEL
Sets the dwell time at each sweep step.
or
Scroll up or down per row.
GO TO IDX
Press double-arrow up to scroll up or double-arrow down to scroll down per page.
Press page up (blue double-up arrow) to scroll the displayed frequencies/levels to the previous page in the list. Press page down (blue double-down arrow) to scroll the displayed frequencies/levels to the next page in the list.
Select the index row (highlighted list index) and press either the EDIT FREQ or EDIT LEVEL button to edit the open parameter. Edit the open parameter using the cursor control keys, rotary data knob, or enter a new value using the keypad and appropriate termination.
The complete list of 4000 (0-3999) index values remain as part of the list. Generally, a list sweep starts with list index 0 and stops at the index number of desired frequency steps, which may be less than index number. Each list index can also be individually edited from the List Setup and List Type menus.
