: Operation Verification : Presetting the MG362x1A
 
Presetting the MG362x1A
The signal generator should be preset to the factory-selected default parameters before continuing operation and verification testing. Factory Reset clears the current setup parameters. If these parameter values are needed for future testing, save them as a stored setup before presetting the signal generator.
Press: 3-Line Icon| FILES. Name the setup file to be saved and press SAVE.
To access the RESET ALL menu shown in Figure: Reset Menu and set to factory default:
Press: SYSTEM | RESET | SYSTEM RESET | RESET ALL
or
Press: 3-Line Icon| SETTINGS | RESET | RESET ALL
Reset Menu