Remote Spectrum Monitor MS27201A User Guide : General Information
 
General Information
 
Introduction
Before You Begin
Additional Documentation
Document Conventions
Instrument Description
Available Models
Available Options
Instrument Care and Preventive Maintenance
Ventilation and Cooling
Connector Care
ESD Caution
Calibration and Verification
Contacting Anritsu for Sales and Service
Introduction
The MS27201A Remote Spectrum Monitor (RSM) User Guide is part of a set of manuals that cover all of the instrument functions and their use. This manual covers the instrument overview, system functions, and other common features, along with a brief guide to basic measurement concepts and setups. Most instrument operations are covered in specific chapters of this manual as listed below. Remote programming is covered in the programming manual. Additionally, the MS27201A RSM offers Anritsu Remote and Report Tools (ARRT) software that replicates the instrument user interface on your PC screen and allows network connection to an instrument or the ability to recall data and perform on-screen measurement analysis without a connection to an instrument (refer to ARRT Software).
Before You Begin
• Read the Remote Spectrum Monitor Product Information, Compliance, and Safety Guide (PN: 10100-00064) for important safety, legal, and regulatory notices before operating the equipment.
Additional Documentation
Related Manuals
Document Part Number
Description
10100-00064
Product Information, Compliance, and Safety Notices
11410-02833
MS27201A Remote Spectrum Monitor Technical Data Sheet
10580-00481
MS27201A Remote Spectrum Monitor Programming Manual
10580-00475
IQ Signal Master™ MX280005A Vector Signal Analysis Software User Guide
10580-00418
Vision™ MX280001A Spectrum Monitoring Application Software User Guide
10580-00447
Spectrum Analyzer Measurement Guide
Zero Span IF Output (Option 89)
Gated Sweep (Option 90)
AM/FM Modulation Measurement (Option 509)
10580-00448
Real -Time Spectrum Analyzer (RTSA) Measurement Guide (Option 199)
10580-00449
5GNR Measurement Guide (Option 888)
GNSS Receiver (Option 31)
Gated Sweep (Option 90)
10580-00450
LTE Signal Analyzer Measurement Guide (Option 883)
GNSS Receiver (Option 31)
Gated Sweep (Option 90)
10580-00451
Pulse Analyzer Measurement Guide (Option 421)
10580-00490
IQ Capture/Streaming Measurement Guide (Options 124/126 and Options 125/127)
10580-00501
WCDMA Measurement Guide (Option 871)
10580-00504
Channel Scanner Measurement Guide (Option 27)
For additional information and literature covering your product, visit the product page of your instrument and select the Library tab:
https://www.anritsu.com/en-US/test-measurement/products/ms2720xa
For more information and literature on Vision Spectrum Monitoring Application Software visit the product page and select the Library tab:
https://www.anritsu.com/en-us/test-measurement/products/mx280001a
For more information and literature on IQ Signal Master Vector Signal Analysis Software visit the product
page and select the Library tab:
https://www.anritsu.com/en-us/test-measurement/products/mx280005a
Document Conventions
The following conventions are used throughout the MS27201A documentation set.
Instrument Identification
When identifying a frequency option for the MS27201A, that option number is appended after the model number; example: MS27201A‑0709.
User Interface
The MS27201A user interface consists of menus, buttons, toolbars, and dialog boxes.
User Interface Navigation
Elements in navigation paths are separated as follows: MARKER > PEAK SEARCH > NEXT PEAK.