Remote Spectrum Monitor MS27201A User Guide
:
Notification Messages and Troubleshooting
Notification Messages and Troubleshooting
Introduction
This appendix provides a list of notification messages and their meaning. If any error condition persists, contact your local Anritsu Service Center (
http://www.anritsu.com/contact-us
).
Remote Spectrum Monitor displays the following message types:
•
Self-Test Messages
, indicating self-test pass or fail conditions.
•
Informational Notifications
, such as notification of a screen capture.
•
Warning Notifications
, such as an ADC over-range warning.
•
Error Notifications
, such as an internal instrument fault.
Messages have the following display characteristics:
•
Transient messages appear briefly and then fade away.
•
Persistent messages remain on the display and require user intervention to correct the condition.
•
Some messages are logged but not displayed, such as messages in the event log.
•
Messages may be displayed either in the Title bar or in a pop-up window.
Follow the
UDP Discovery Tool Firewall Settings
to change the Windows firewall settings if Discovery Tool is unresponsive.
Refer to
System Override
if the instrument does not respond to SCPI commands and needs to be reset remotely.