Cannot start measurement without a connected Antenna
In Title bar, Not Logged, Persistent
Cannot turn power cal on.
In Title bar, Not Logged, Transient
Channel list is full, maximum size
In Title bar, Not Logged, Transient
Concatenation has been aborted.
When user aborts concatenation of streaming metadata files
Connecting to access point.
In Title bar, Not Logged, Persistent
Custom SEM File Imported.
In Title bar, Logged, Transient
Density data not available in playback.
In Title bar, Not Logged, Transient
External reference detected - switching reference source to external.
In Title bar, Logged, Transient
External reference disconnected – switching reference source to GPS.
In Title bar, Logged, Transient
External reference disconnected – switching reference source to internal.
In Title bar, Logged, Transient
External reference disconnected – switching reference source to Internal High.
In Title bar, Logged, Transient
File Does Not Exist.
In Title bar, Not Logged, Transient
File Recall Failed
In Title bar, Not Logged, Transient
File Recalled Successfully
In Title bar, Not Logged, Transient
File Save Failed
In Title bar, Not Logged, Transient
File Saved Successfully
In Title bar, Not Logged, Transient
File successfully saved as: filename
When saving a file (e.g., trace, setup)
File <filename> import successfully
In Title bar, Not Logged, Transient. X represents the filename.
File <filename> export successfully
In Title bar, Not Logged, Transient. X represents the filename.
Frequency setting is outside sensor range. Measurement performance is not guaranteed outside the range of sensor. It is recommended to keep start and stop frequencies within range listed on sensor
Pop-up, Not Logged, Transient
The following options will expire in less than 24 hours (9xxx)
In Notifications bar
GPS reference detected - acquiring GPS
In Title bar, Logged, Transient
GPS reference acquired - switching reference source to GPS
In Title bar, Logged, Transient
GPS reference disconnected – switching reference source to Internal
In Title bar, Logged, Transient
GPS reference no longer available – switching reference source to Internal High
In Title bar, Logged, Transient
IF Gain Cal completed
In Title bar, Logged, Transient
Internal High reference no longer valid – switching frequency reference source to Internal
In Title bar, Logged, Transient
Internal High reference no longer valid – switching time reference source to Internal
In Title bar, Not Logged, Transient
Insufficient data. A map point is skipped. Setting a higher distance or increasing sweep time can help.
In Title bar, Not Logged, Persistent
Input greater than DMax: <value>
In Title bar, Not Logged, Transient. The value can be start or stop.
IQ STREAM - Sweep paused while IQ stream is in progress
In Title bar, Not Logged, Persistent
IQ CAPTURE - Sweep paused while IQ capture is in progress
In Title bar, Not Logged, Persistent
Language successfully updated to <Language Name>
In Title bar, Logged, Transient.
Language failed to update to <Language Name>
In Title bar, Logged, Transient.
Limit recall initiated
When a limit setup file is selected for recall.
Limits are not available for circular graphs
In Title bar, Not logged, Transient
Logging in csv stopped
In Title bar, Not logged, Transient
Measurement changed. Trace recording stopped
In Title bar, Logged, Transient
Measurement changed. Trace playback stopped
In Title bar, Logged, Transient
Measurement changed. Trace recording in csv stopped
In Title bar, Logged, Transient
Missing GPS data. Ensure good GPS fix or directional antenna connection
In Title bar, Not Logged, Persistent
No bearing from directional antenna. Check connection and try again
In Title bar, Not Logged, Transient
No application loaded. Factory reset required
In Title bar, Logged, Persistent
Options upgraded. Please restart the instrument to use new features
In Title bar, Not Logged, Transient
Preset Completed
In Title bar, Not Logged, Transient
Presetting Instrument
In Title bar, Not Logged, Transient
Please wait. Acquiring magnetic data for directional antenna.
In Title bar, Not Logged, Persistent
Rebooting Instrument
In Title bar, Not Logged, Transient
Rebooting instrument into Recovery mode
In Title bar, Not Logged, Transient
Recall initiated
When a file is selected for recall
Reset Completed
In Title bar, Logged, Transient
Resetting Instrument
In Title bar, Logged, Transient
Recording In Progress
In Title bar, Logged, Persistent
Recording Complete. File saved as <filename>
In Title bar, Logged, Transient
Remove any RF input signal to the external sensor
Pop-up, Not Logged, Transient
RF Attenuation Auto must be OFF or Reference Level must be below -40dBm to enable Preamp
In Title bar, Logged, Transient
Successfully concatenated <N> files
When the concatenation of streaming metadata files is complete.
Successfully connected to access point
In Title bar, Not Logged, Transient
Screenshot saved
When saving a screenshot is successful
Scale adjusted to accommodate user change
In Title bar, Not logged, Transient
<Name of Setting> range adjusted to accommodate user change
In Title bar, Not logged, Transient. The setting can be distance, time and frequency.
Self test Passed
In Title bar, Logged, Transient
Self test Failed
In Title bar, Logged, Transient
Software update files found on USB
In Title bar, Not Logged, Transient
Stopped saving sweeps after sweep complete
When the save on event triggers are disabled after end-of-sweep.
Stopped saving sweeps after limit crossing
When the save on event triggers are disabled after a limit fails.
Trace normalization ready
In Title bar, Not Logged, Transient
Trigger delay updated to minimum allowable value for selected bandwidth and bit format