This chapter gives a brief overview of the 5GNR analyzer and its measurement capabilities for Field Master series, Site Master and Remote Spectrum Monitor instruments. The purpose of this chapter is to provide a starting point for making 5GNR measurements. This chapter mainly describes measurement setup, including selecting the analyzer and setting up frequency, bandwidth, amplitude, span, and markers. After measurements are taken, refer to
Saving and Recalling Measurements for a description of saving, recalling, and managing measurement files.
A basic understanding of the measurement concepts presented in Spectrum Analyzer measurement guide (10580-00447) is recommended before performing the procedures in this chapter. 5GNR measurements include the use of additional functions beyond frequency, span, amplitude, and marker functions.
Setting Frequency and Band Parameters through
Setting Up Markers explain general setup procedures and settings.
5GNR Measurement Setup through
5GNR Coverage Mapping (Option 431) provide example 5GNR measurements that are available in the 5GNR analyzer.
5GNR measurement setups typically conform to the 3GPP and device manufacturer standards. They can be configured manually or based on the band selection and accompanying ARFCN and GSCN assignments. The instrument is designed to make setting up your measurement as easy as possible. Simply refer to the specification for the measurement and base station settings that you are testing, select the measurement, and enter the base station measurement setup parameters.
5GNR modulation measurements for both frequency division duplex (FDD) and time division duplex (TDD) signals can be viewed in:
5GNR Coverage Mapping (Option 431) measurement consists of the following map modes: