Field Master™ MS2070A/MS2080A User Guide : ARRT Software : Connecting to the MS2070A/80A or Simulation Mode
 
Connecting to the MS2070A/80A or Simulation Mode
Connecting to a networked instrument or to the simulation mode is established via the system menu. If connecting to an instrument, the instrument must first be connected to the network via Ethernet or Wi-Fi and the hostname/ IP address of the instrument must be known.
To view the instrument’s hostname/IP address follow the steps below:
1. Select the System menu > SYSTEM INFORMATION on the instrument.
2. Enter either Hostname/IP address in the field provided under the INSTRUMENT tab. See Figure: Connecting to Instrument using Hostname/IP Address.
3. Click CONNECT/RETRY button to connect the ARRT software to the instrument
4. Alternatively, to get connected to simulation mode click SIMULATION tab. See Figure: Connecting to Simulation Mode.
5. Choose your instrument from the Simulation Mode drop-down list and click START button.
 
Note 
Click ETHERNET SETTINGS to change network settings, if needed.
 
Connecting to Instrument using Hostname/IP Address
 
Connecting to Simulation Mode