Site Master™ MS2085A/MS2089A User Guide : General Information
 
General Information
 
Introduction
Before You Begin
Additional Documentation
Document Conventions
Instrument Description
Available Options
Instrument Care and Preventive Maintenance
Ventilation and Cooling
Connector Care
ESD Caution
Calibration and Verification
Contacting Anritsu for Sales and Service
Introduction
The MS2085A/89A Site Master User Guide is part of a set of manuals that cover all of the instrument functions and their use. This manual covers the instrument overview, system functions, and other common features, along with a brief guide to basic measurement concepts and setups. Most instrument operations are covered in specific chapters of this manual as listed below. Remote programming is covered in the programming manual. Additionally, the Site Master offers Anritsu Remote and Report Tool (ARRT) software that replicates the instrument user interface on your PC screen and allows network connection to an instrument or the ability to recall data and perform on-screen measurement analysis without a connection to an instrument (refer to ARRT Software).
Before You Begin
Read the Important Information, Compliance, and Safety Guide (PN: 10100-00069) for important safety, legal, and regulatory notices before operating the equipment.
Charge the instrument battery using the supplied battery charger until fully charged.
Note 
The instrument may reboot when the battery charge level is low and external power is removed.
Additional Documentation
Related Manuals
Document Part Number
Model Number
Description
10100-00069
MS2085A/89A
Important Product Information, Compliance, and Safety Notices
11410-02906
MS2085A/89A
MS2085A/89A Site Master™ Technical Data Sheet
10580-00502
MS2085A/89A
MS2085A/89A Site Master™ Programming Manual
10580-00475
MS2089A
IQ Signal Master™ MX280005A Vector Signal Analysis Software User Guide
10580-00418
MS2089A
Vision™ MX280001A Spectrum Monitoring Application Software User Guide
10580-00447
MS2089A
Spectrum Analyzer Measurement Guide
Interference Finder (Option 24)
Zero Span IF Output (Option 89)
Gated Sweep (Option 90)
Coverage Mapping (Option 431)
EMF Measurement (Option 444)
10580-00448
MS2089A
Real-Time Spectrum Analyzer (RTSA) Measurement Guide
Interference Analysis RTSA (IA RTSA) Analyzer (Option 24)
10580-00449
MS2089A
5GNR Measurement Guide (Option 888)
GNSS Receiver (Option 31)
Gated Sweep (Option 90)
Coverage Mapping (Option 431)
10580-00450
MS2089A
LTE FDD/TDD Signal Analyzer (Option 883) Measurement Guide
GNSS Receiver (Option 31)
Gated Sweep (Option 90)
Coverage Mapping (Option 431)
10580-00490
MS2089A
IQ Capture/Streaming Measurement Guide (Option126 and 127)
10580-00492
MS2089A
High Accuracy Power Meter Measurement Guide (Option 19)
10580-00493
MS2085A/89A
Cable and Antenna Analyzer Measurement Guide
10580-00501
MS2089A
WCDMA Measurement Guide
10580-00504
MS2089A
Channel Scanner Measurement Guide
10580-00505
MS2085A/89A
Anritsu Report Tool User Guide
For additional information and literature covering your product, visit the product page of your instrument and select the Library tab:
https://www.anritsu.com/en-us/test-measurement/products/ms208xa
For more information and literature on Vision Spectrum Monitoring Application Software visit the product page and select the Library tab:
https://www.anritsu.com/en-us/test-measurement/products/mx280001a
For more information and literature on IQ Signal Master Vector Signal Analysis Software visit the product
page and select the Library tab:
https://www.anritsu.com/en-us/test-measurement/products/mx280005a
 
Document Conventions
The following conventions are used throughout the MS2085A/89A documentation set.
Instrument Identification
When identifying a frequency option for the MS2085A/89A, that option number is appended after the model number; example: MS2089A‑0706.
User Interface
The MS2085A/89A user interface consists of menus, buttons, toolbars, and dialog boxes.
User Interface Navigation
Elements in navigation paths are separated as follows: MARKER > PEAK SEARCH > NEXT PEAK.