This manual provides instructions on using the MX281000A Auto Test and Alignment Software with the Anritsu MA25211A Auto Test and Alignment Accessory Kit and LMR Master S412E. The MX281000A Auto Test and Alignment software performs radio testing and alignment functions as prescribed by manufacturers of Land Mobile Radios. MX281000A runs on an external PC that controls the LMR Master S412E, external test equipment, contained within the MA25211A accessory kit, and the radio under test.

The MX281000A Auto Test and Alignment software requires a PC, software options, LMR Master, node-locked license, and an MA25211A accessory kit. Each is described below.

The MX281000A software requires a node-locked license or a USB dongle. Refer to The PC License File Format.

The test equipment and accessories are listed in MA25211A Kit Contents and Equipment Required.

The radios supported are:

APX6000, APX6500, APX7000, APX8000, APX8000H, APX8500, and APXNext

Anritsu test equipment used along with the MX281000A Auto Test and Alignment User Guide is part of a set of manuals shown in Table: Related Manuals. Refer to instrument product page for more information.

For additional information and literature covering your product, visit the product page of your analyzer and select the Library tab:https://www.anritsu.com/en-us/test-measurement/products/s412e.

The equipment discussed in this manual is susceptible to electrostatic discharge (ESD) damage. Operators should exercise practices outlined within industry standards such as JEDEC-625 (EIA-625), MIL-HDBK-263, and MIL-STD-1686, which pertain to ESD and ESDS devices, equipment, and practices. Because these apply to the user’s PC and the analyzer, it is recommended that any static charges that may be present are dissipated before disassembling the computer case or connecting cables or antennas to the analyzer. It is important to remember that the operator may carry a static charge that can cause damage and these charges should be dissipated through proper grounding. Following the practices outlined in the above standards will ensure a safe environment for both personnel and equipment.

To contact Anritsu, visit the following URL and select the services in your region: