:SENSe{1-16}:CORRection:COLLect:LRL:WAVeguide Subsystem

VectorStar™ MS4640A SeriesMicrowave Vector Network Analyzer : SCPI Commands : :SENSe{1-16}:CORRection:COLLect:LRL:WAVeguide Subsystem

The :SENSe{1-16}:CORRection:COLLect:LRL:WAVeguide subsystem commands provide control of the waveguide Line-Reflect-Line parameters for dialectric and cutoff frequency values.

LRL Calibration Subsystems

The LRL-related calibration commands are organized into five (5) subsystems in the following sections:

• :SENSe{1-16}:CORRection:COLLect:LRL:CALB Subsystem

• :SENSe{1-16}:CORRection:COLLect:LRL:DEVice{1-4} Subsystem

• :SENSe{1-16}:CORRection:COLLect:LRL:PORT Subsystem - 4-Port VNAs

• :SENSe{1-16}:CORRection:COLLect:LRL:SINGleton Subsystem - 4-Port VNAs

• :SENSe{1-16}:CORRection:COLLect:LRL[:CALa] Subsystem (this subsystem)

:SENSe{1-16}:CORRection:COLLect:LRL:WAVeguide:DIELectric <NRf>

:SENSe{1-16}:CORRection:COLLect:LRL:WAVeguide:DIELectric?

Description

Sets the LRL waveguide calibration dielectric for the given channel. Outputs the LRL waveguide calibration dielectric for the given channel.

Cmd Parameters

<NRf>

Query Parameters

Output

<NR3>

Range

MPND

Default

0.00000000000E+000

Syntax Example

:SENS1:CORR:COLL:LRL:WAV:DIEL <NRf>

:SENS1:CORR:COLL:LRL:WAV:DIEL?

:SENSe{1-16}:CORRection:COLLect:LRL:WAVeguide:FREQuency <NRf>

:SENSe{1-16}:CORRection:COLLect:LRL:WAVeguide:FREQuency?