VectorStar™ MS4640A Series Microwave Vector Network Analyzers : Power Menus - 4-Port VNAs
 
Power Menus - 4-Port VNAs
 
Chapter Overview
Overview of Power Menus - 4-Port VNAs
Appearance of Power Menus on 4-Port VNAs
Sweep Types
VNA Model, Option, and Mode
Maximum and Minimum Power Settings
Power Menus for Frequency-Based Sweep (Linear and Log)
Power Menus for Segment-Based Sweep (Frequency and Index)
Power Menus for Power-Based Sweep (CW and Swept Frequency)
POWER Menu Variants - 4-Port VNAs
POWER Menu Name and Button Changes
POWER Menu Button Changes
POWER Menu with Frequency-Based Sweeps
POWER Menu with Segment-Based Sweeps
POWER Menu with Power-Based Sweeps
ATTENUATORS Menu Variants - 4-Port VNAs
ATTENUATOR Menu Button Availability
ATTENUATOR Menu Location
POWER SETUP Menu Variants - 4-Port VNAs
Sweep Type Frequency-Based
Sweep Type Segment-Based
Sweep Type Power-Based
Receiver Setup and Calibration Menus - 4-Port VNAs
External Source Power Menu
Chapter Overview
This chapter provides information on per-port power control and configuration, and, if equipped, attenuator configurations for the VNA in 4-Port Mode. The power menus and associated field toolbars allow the user to set various power mode parameters which apply to the currently active channel. The power menus, their link structure, appearance, and related dialog boxes vary depending on the setting of the SWEEP TYPE menu as either a Frequency-Based Sweep (Linear or Log), a Segment-Based Sweep (Frequency- or Index-Based), or a Power Sweep (CW Frequency or Swept Frequency). Note that the menu appearance, button availability, and hierarchical links change if the VNA is in 2-Port Mode. For 2-Port Mode power menus, see Power Menus - 2-Port VNAs.