Application Menu Variants for BB/mm-Wave

APPLICATION Menu – Variants – For MS4642A, MS4644A, and MS4645A VNAs

Broadband/Millimeter-Wave (BB/mm-Wave) control buttons on the APPLICATION Menu. 1. For any MS4640A Series VNA without Option 007 – Receiver Offset. 2. For MS4642A, MS4644A, and MS4645A VNA with Option 007.	3. For MS4642A, MS4644A, and MS4645A VNA with Option 007 and Option 082/083 Millimeter-Wave.

APPLICATION Menu – Variants – For MS4647A VNAs

Broadband/Millimeter-Wave (BB/mm-Wave) control buttons on the APPLICATION Menu. 1. APPLICATION Menu – MS4647A – with Option 007 Receiver Offset. 2. APPLICATION Menu – MS4647A – with Option 007 and Option 082/083 Millimeter-Wave.	3. APPLICATION Menu – MS4647A – with Option 007 and Option 080/081 Broadband/Millimeter-Wave.

See the other APPLICATION menu chapters for descriptions of other menu button selections.

• The buttons present and their names vary depending on the VNA model number and the installed options. Typical menu variants are shown in the figures above.

Part of the Receiver Configuration button selection group. Only for MS4642A, MS4644A, and MS4645A VNAs. The Rcvr Config area on the menu provides a button selection group that allows control of the receiver configuration mode. Depending on the instrument model and the installed options, this button selection group can consist of from one to multiple receiver configuration options.

Part of the Receiver Configuration button selection group. Only for MS4647A VNAs. The Rcvr Config area on the menu provides a button selection group that allows control of the receiver configuration mode. Depending on the instrument model and the installed options, this button selection group can consist of from one to multiple receiver configuration options.

Part of the Receiver Configuration button selection group. This button is only available on MS4642A, MS4644A, or MS4645A VNAs. If the instrument is an MS4647A, the BB/mmWave button appears (described below). Select sets the mmWave receiver configuration and de-selects other receiver configuration buttons.

Select displays the 3738 SETUP menu. Use this button for configuration if the mmWave (3738 Test Set) was selected above.

Select displays the 3738 SETUP menu. Use this button for configuration if the BB/mmWave (3738 Test Set) was selected above.

Select displays the 3739 SETUP menu. Use this button for configuration if the mmWave (3738 Test Set) was selected above.

Select displays the 3739 SETUP menu. Use this button for configuration if the BB/mmWave (3738 Test Set) was selected above.


	Anritsu Company 1-800-ANRITSU 10450-00008, Rev. L