VectorStar™ MS4640A Series Microwave Vector Network Analyzers : Main Menu : MAIN Menu
 
MAIN Menu
The Main Menu (or MAIN) provides 15 arrow buttons that link to lower-level submenus. The bulleted navigation paths presented in the sections below use the following conventions:
• Buttons are in initial capitals, such as Channel for the Channel button. For brevity, buttons are not named.
• Menus, toolbars, and dialog box names are in all capitals, such as FREQUENCY for the Frequency menu.
• For brevity, menus are not labeled with the word “menu.”
• Dialog boxes are labeled with the words “dialog box” such as the SAVE FILE dialog box.
• Toolbars are labeled such as the START FREQUENCY field toolbar.
 
MAIN MENU
Navigation paths to all menus, toolbars, and dialog boxes start with the MAIN MENU.
• MAIN MENU
 
MAIN MENU  
 
Channel
Select displays the CHANNEL menu.
• Channel Menus
Frequency
Select displays the FREQUENCY menu. The name, appearance, and available buttons on the FREQUENCY menu varies depending on the sweep type set and if CW frequency is selected.
• FREQUENCY Freq. Based Log Sweep Menu
Power
Select displays the POWER menu which varies depending on 2-Port of 4-Port Mode, and the installed options.
• Power Menus - 2-Port VNAs
• Power Menus - 4-Port VNAs
Sweep Setup
Select displays the SWEEP SETUP menu.
• Sweep Menus
Averaging
Select displays the AVERAGING menu.
• Averaging Menus
Calibration
Select displays the CALIBRATION menu.
• Calibration Menus - 2-Port VNAs
• Calibration Menus - 4-Port VNAs
Measurement
Select displays the MEASUREMENT menu.
• Measurement Menus
Application
Select displays the APPLICATION menu.
• Application Menus - Overview
• Application Menus - Multiple Source
• Application Menus - Broadband/Millimeter-Wave
• Application Menus - Noise Figure
• Application Menus - Mixer Setup
• Application Menus - NxN
Trace
Select displays the TRACE menu.
• Trace Menus
Response
Select displays the RESPONSE menu.
• Response Menus - 2-Port VNAs
• Response Menus - 4-Port VNAs
Display
Select displays the DISPLAY menu.
• Display Menus
Scale
Select displays the SCALE menu which allows the user to change the scaling and other attributes of a trace display.
• Scale Menus
The available SCALE menu buttons change based on the settings on the TRACE FORMAT menu.
• Trace Menus
Marker
Select displays the MARKER [1] menu.
• Marker Menus
System
Select displays the SYSTEM menu.
• System Menus
File
Select displays the FILE menu.
• File Management Menus